 UNISORB V-100 Epoxy Grouting materials offer solutions for specific machinery grouting needs.  A superior quality product with excellent flowability, high resistance to impact, and extremely rapid cure times. It is an excellent choice where very high strength and low grout quantities are preferred.
 A highly flowable product intended for use where larger pours up to 8" deep are required, providing excellent compressive strength and rapid cure time.
 A product developed to be used as a trowelable adhesive to place under steel plate, bonding them to concrete floors. This can be used in either temporary or permanent installations. This product bonds to most surfaces.
 A product designed for rail installations which require extraordinarily high strengths combined with resistance to temperature, humidity, acid and chemical environments. This product will allow pours with 3/4" to 8" cross sections.
 A product designed for crane rail and other extraordinarily severe applications where ultra high strength combined with resistance to temperature and humidity are important.
 A product developed for sealing the exposed edge of inertia block isolation material at the floor level. It cures to a flexible solid state, preventing transmission of vibrations while protecting the edge of the isolation pad.
 A product designed for applications where high mechanical strength and high temperature resistance over regular epoxy grout is required. It has a maximum service temperature of 325° F.
 A product developed for applications where high mechanical strength and very high temperature resistance are required. It has a maximum service temperature of 425° F.
 A product developed for applications where high mechanical strength is required, and where low temperatures are encountered while mixing and pouring. It performs best at temperatures between 45°-65° F.
 Ready to use plastic grout forms that eliminate on-site form construction. Easy to place and remove.
|
